| All Hole Patterns are designed to fit our frames, posts, and stakes. Please review the chart below to see which hole pattern will appear on your custom panels. All holes are 5/16" diameter round holes. Holes are measured from center of hole to edge of panel. NOTE: Sign panels do not come with bottom grommets unless requested. |
| Panel Width |
Material | Hole Pattern | Top Holes 16" on Center |
Top Holes 2.5" from Edge |
Bottom Holes 16" on Center |
Bottom Holes 2.5" from Edge |
Top Grommets |
Hole Distance from Top |
Hole Distance from Bottom |
Image |
| 18" - 23" | Aluminum | Standard |  |
|
3/8" | 3/8" |  |
|||
| 18" - 23" | Aluminum | Swinger | |
|
|
3/4" | 3/8" |  |
||
| 24" | Aluminum | Swinger | |
|
|
|
3/4" | 3/8" |  |
|
| 24" - 36" | Aluminum | Standard | |
|
|
|
3/8" | 3/8" |  |
|
| 25" - 36" | Aluminum | Swinger | |
|
|
|
3/4" | 3/8" |  |
|
| 24" - 30" | Aluminum | POST30 | |
|
|
|
3/4" | 3/8" |  |
|
| 18" - 24" | Cor-x | Standard | |
|
3/4" | 3/4" |  |
|||
| 18" - 24" | Cor-x | Swinger | |
|
3/4" | 3/4" | |
|||
| 25" - 36" | Cor-x | Standard | |
|
3/4" | 3/4" |  |
|||
| 25" - 36" | Cor-x | Swinger | |
|
3/4" | 3/4" | |
|||
| 24" - 30" | Cor-x | POST30 | |
|
3/4" | 3/4" |  |
|||
| 18" - 23" | Polyethylene | Standard | |
|
3/8" | 3/8" | |
|||
| 18" - 23" | Polyethylene | Swinger | |
|
3/8" | 3/8" |  |
|||
| 24" - 36" | Polyethylene | Standard | |
|
|
|
3/8" | 3/8" | |
|
| 24" - 36" | Polyethylene | Swinger | |
|
|
|
3/8" | 3/8" |  |
|
| 18" - 23" | Polystyrene | Standard | |
|
3/8" | 3/8" | |
|||
| 18" - 23" | Polystyrene | Swinger | |
|
|
3/8" | 3/8" | |
||
| 24" | Polystyrene | Swinger | |
|
|
|
3/4" | 3/8" | |
|
| 24" - 36" | Polystyrene | Standard | |
|
|
|
3/8" | 3/8" | |
|
| 25" - 36" | Polystyrene | Swinger | |
|
|
|
3/4" | 3/8" |  |
|
| 24" - 30" | Polystyrene | POST30 | |
|
|
|
3/4" | 3/8" | |
|
| 18" - 23" | PVC | Standard | |
|
3/8" | 3/8" | |
|||
| 18" - 23" | PVC | Swinger | |
|
3/8" | 3/8" | |
|||
| 24" - 36" | PVC | Standard | |
|
|
|
3/8" | 3/8" | |
|
| 24" - 36" | PVC | Swinger | |
|
|
|
3/8" | 3/8" | |
|
| 18" - 23" | Steel | Standard | |
|
3/8" | 3/8" | |
|||
| 18" - 23" | Steel | Swinger | |
|
3/8" | 3/8" | |
|||
| 24" - 36" | Steel | Standard | |
|
|
|
3/8" | 3/8" | |
|
| 24" - 36" | Steel | Swinger | |
|
|
|
3/8" | 3/8" | |
|
| Custom Shape & Speciality Panels | ||
| Panel Type | Description | Image |
| RIDERS Up to 23" Wide (Any material) |
Top and Bottom Holes: Holes are 16" on center. All holes are 3/8" in from top and bottom edge. Grommets are not included. | |
| RIDERS 24" - 36" Wide (Any material) |
Top and Bottom Holes: Holes are 16" on center and 2.5" from the side edge. All holes are 3/8" in from top and bottom edge. Grommets are not included. | |
| COMMERCIAL SIGNS | Used for 36" + Wide Commercial Signs. All Holes are 3/4" from top, bottom, and side edges. 2 Top Grommets are included for hanging panels or per request. |  |
| DOME | Top Holes: Holes are 15" on center and 3.5" from the top edge. 2 side holes are 13.5" up from the bottom of the panel and 3/8" in from edge. Grommets are included for hanging panels. Bottom Holes: Inside two holes are 16" on center and outside two holes are 2 1/2" from edges. Holes are 3/8" in from the edge. Grommets are included on inside holes for hanging panels (on aluminum and styrene). |  |
| MINI HANGING | Top Holes: Two holes are 13.5" on center. Holes are 3/8" in from the edge. Grommets are not included. No bottom holes. |  |
| FAIS Stake | Top and Bottom Holes: There are two center holes, one top and one bottom. Holes are 3/4" in from the top and bottom edges. Grommets are not included. |  |
